(as of [price_update_date] – Details)
Air Connector: Universal G1 / 4
Watering can: 250ml plastic pots
Transmission efficiency (paint utilization): 65% -85%
Air consumption: 12-15.5 cfm
The amount of paint: 120-160ml / min
Spray width Length: about 100-160mm
Recommend spraying distance: 150mm-250mm
We recommend spraying pressure (working pressure): 2.0-2.5 bar
Nozzle diameter: 0.8/1.0/1.2mm
Paint supply mode: Gravity
Before First Use
NOTICE: Before first use, clean the
Spray Gun thoroughly.
If not removed, the material used for testing and corrosion prevention will contaminate paint.
CAUTION: DO NOT STOP WHEN SPRAYING.
Spraying materials will start to set and dry.as soon as they come in contact with the air.
They will cause a permanent clog if not cleared.immediately.If discontinuing spraying for more than half an hour, turn off the air supply, disconnect Cup from Gun Body and thoroughly rinse Cup and Gun Body with fresh, clean water.
The gravity feed paint sprayer suits for almost all kinds of paint.
Action trigger design saves raw materials and practical.
Widely used by the general model enthusiasts.
Classic comfortable handle, showing incredible handling and balance.
Durable and Lightweight Design.