As an Amazon Associate I earn from qualifying purchases from amazon.com

RAID 0 Vs RAID 1 – What’s The Difference

[ad_1]

RAID 1 Vs RAID 0

RAID 0 offers something known as striping with no mirroring but technically it isn’t redundant. Stripping is when data is split evenly across two or more drives, essentially segmenting the data between the different drives. Unfortunately, there are issues with this type of RAID, as if one disk fails, then the entire RAID 0 setup also fails because the data is stored in alternative bits, making it completely unusable. RAID 0 also means you have to buy more than one drive and while you get better performance, you double your chances of losing your data with possible failures.

RAID 0 VS RAID 1

RAID 1 has a huge practical application to the average consumer because unlike higher levels of RAID, you don’t need complicated controllers in order for it to work well. RAID 1 is also a true RAID because you have redundant storage of your data. RAID 1, like RAID 0, also requires at least two drives and works by storing your data segments on both drives. This means that both drives contain all of your data, giving you no performance benefits, however, your data is essentially backed up if one drive fails.

Performance

We already touched upon the reliability for both RAID 1 and 0, with RAID 1 the only one that protects your data from a drive failure. This, of course, sacrifices performance and increases costs but what is the performance of both types of RAID actually like? Well, let’s take a look.

Read/ Write

RAID 0 offers very fast read and write speeds because the data is split between two or more drives. The transfer speeds are only limited by the speed of the RAID controller and normally, the transfer speed of the array is the transfer speed of all the disks.

RAID 1 is much slower than RAID 0, however, has the same speed when writing to a single disk. The reason it is slow is because RAID 1 is essentially writing everything twice when using two drives. When it comes to read speeds, RAID 1 again surfers in terms of performance but this can depend on the RAID controller.

Capacity

The capacity difference is obviously a big between RAID 1 and 0, with RAID 1 essentially writing the data across every drive. This takes up twice as much storage as RAID 0, however, obviously has its reliability benefits instead.

RAID 1 & RAID 0 Combinations

Combining the two RAIDs is yet another possible solution when it comes to storing data. When combining the two, there are two outcomes – RAID 01 and RAID 10. RAID 10 is a bit more widely used as it is the superior way while utilizing the same amount of drives. The performance between both RAID 01 and RAID 10 is the same, as is storage capacity, however, the fault tolerance level of RAID 10 is much more.

Combining RAID 0 and RAID 1

RAID 10 is also known as RAID 1+0 and is a configuration that combines disk striping and mirroring to help protect your data. You need to have at least four drives for this to work but it essentially stripes across mirrored pairs and as long as one of the disks in each pair is still functioning, you can still retrieve your data.

RAID 10 provides data redundancy and improves performance at the same time. It is a very popular option, with little downtime to worry about, along with high read and write speeds. The four disk minimum does bring a lot of extra costs, which could make it an overkill option for a lot of consumers.

[ad_2]

We will be happy to hear your thoughts

Leave a reply

Kin Abelle Flats
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0